DAIKO

SF 625

ERNiCrMo-3 MIG TIG SAW

Solid wire for Nickel base 625 alloy. It is designed to match the composition and properties of 625. This alloy is used for the high temperature strength and structural stability and is also used for its resistance to general corrosion, pitting, crevice and stress corrosion cracking in severe chloride media.Useful proprieties from -269°C to above 1000°C are achieved.
It is used for welding of alloy 625, alloy 825, alloy 25-6MO, and a range of high alloy austenitic and super austenitic stainless steels. It is also used for surfacing of steel, for welding 9% Ni steels, and for welding various corrosion-resistant alloys such as alloy 20.

Category Nickel alloys
Product ID SF 625
Type ID ERNICRMO-3 MIG TIG SAW


Line Nickel alloys Daiko Welding product type SF 625

Daiko is a complete assortment of high quality consumables for welding and cladding applications. With over 400 different alloys, Daiko covers the whole range on solid and flux cored wires, strips, fluxes and nickel base covered electrodes.
Other covered electrodes are distributed under G-TECH brand. Most of our products are usually ex stock, ready to be supplied.

For more information about our products contact our department.

Request information
Standards AWS A5.14 ER NiCrMo-3
EN ISO 18274 SNi6625
W. Nr. 2.4831
Materials which can be welded ASTM: UNS N06625; A494 CW-6MC (cast);
DIN: 2.4856;
Proprietary Alloy: Inconel™ 625; Nicrofer™ 6020hMo e 6022hMo.
Other alloys
High Nickel Alloys: Inconel 601, Incoloy 800H Incoloy 825;
Superaustenitics: UNS S31254, 254SMO; 904L.
Cryogenic: 9% Ni steels.
Download data sheet

DAIKO WELDING use cookies to experience better surfing OK More information