Product form
DAIKO
686
MIG Wire (GMAW)
TIG Rod (GTAW)
Subarc Wire (SAW)
Other
product form
Manual Electrodes (SMAW)
Strip (ESW-SAW)
ERNiCrMo-14 MIG TIG SAW
Solid wire for Nickel base alloy 686. This consumable match the 686 nickel base alloy and for overmatch nickel base alloy such as alloy 59, C22, C276 and 625.
It is also used for dissimilar welds in superaustenitic and superduplex stainless steel or combinations of these with Ni base alloys. It is used to deposit overlays of outstanding corrosion-resistance on steels.
The high alloy levels of Cr-Mo-W ensure exceptional resistance to pitting, crevice and general corrosion.
It is also used for dissimilar welds in superaustenitic and superduplex stainless steel or combinations of these with Ni base alloys. It is used to deposit overlays of outstanding corrosion-resistance on steels.
The high alloy levels of Cr-Mo-W ensure exceptional resistance to pitting, crevice and general corrosion.
Category Nickel alloys
Product ID 686
Type ID ERNiCrMo-14 MIG TIG SAW
Line Nickel alloys Daiko Welding product type 686
Daiko is a complete assortment of high quality consumables for welding and cladding applications. With over 400 different alloys, Daiko covers the whole range on solid and flux cored wires, strips, fluxes and nickel base covered electrodes.
Other covered electrodes are distributed under G-TECH brand. Most of our products are usually ex stock, ready to be supplied.
If you need some more information about products please contact our department.
Request information
Standards
AWS A5.14 ER NiCrMo-14
EN ISO 18274 SNi6686
EN ISO 18274 SNi6686